The Armorman 3.0 is designed to provide comfort and support when operating your gimbal while filming and shooting by shifting the weight of the gimbal to your midsection, significantly reducing the strain on your arms.
Everything you need to know about the features and benefits of the Armorman 3.0 gimbal from Tiltamax for film production need to know.
Two mechanical arms with shock-absorbing stabilization systems are attached to the back of the adjustable vest or to the top of the vest in high mode.
When locked in place, the arms feature two adjustable tension knobs on each arm that allow you to adjust the tension based on the weight of your gimbal rig and your preferred operating style.
The arms attach to any Top Bar Gimbal System or Gimbal Ring System with the included brackets or support trays that you simply slide into the arms.
When used in conjunction with the Universal Gimbal Ring Adapters and the Nucleus M, the Armorman 3.0 can become a single control system.
When you are done working, simply release the arms by pulling the release cords for each arm (in normal mode) and then conveniently place them on the sides of the vest with the arm receiver attached.
This way you can keep the vest on between shots. When you're ready to shoot again, simply re-engage the arms and reattach the gimbal.
Supports systems up to 50 lbs and 25mm or 30mm diameter gimbals, including Advanced & Basic Ring Grips.
Mechanical arms reduce the vibration of footsteps
When operating gimbals by redistributing the weight
Supports gimbal operation from eye level
Top Bar and ring-based gimbals like Ronin 2, Movi, Advanced & Basic Ring Grips
The Armorman 3.0 is an innovative accessory designed specifically for operating your gimbal. It provides a high level of comfort and support by shifting the weight of the gimbal to the center of your body, taking the strain off your arms.
With the Armorman 3.0, you can comfortably operate your gimbal for extended periods of time without sacrificing flexibility or performance.
The system consists of two mechanical arms with shock-absorbing stabilization systems that attach either to the back of an adjustable vest or to the top of the vest in high mode.
The arms can be adjusted to any individual working method and the weight of your gimbal system using two adjustable knobs.
You can attach the arms to any top bar gimbal system or gimbal ring system with the included brackets or support trays.
The Armorman 3.0 can be combined with the Universal Gimbal Ring Adapters and the Nucleus M to become a single control system.
When you are finished, you can easily release the arms by pulling the release cords for each arm (in normal mode) and conveniently place them on the sides of the vest.
The vest can be conveniently paused between shots and when you're ready again, you simply re-couple the arms and attach the gimbal.
The Armorman 3.0 supports systems weighing up to 22.5 kg.
Included in delivery are:
Can't find the answer to your question? Contact us.
The product was developed by Tilta, a store specifically for film equipment
Image sources: All images and graphics are copyrighted and property of ©.